Growing table structural supports

Product detailed description

Structural supports for the GardeniX NFT Growing Table made of galvanised steel. Consists of 4 table support pieces, 4 T-pieces for anchoring the cross bars and 1 base Alu bar 350 cm (20x20x2 mm) long.

To complete the table, a minimum of 2 sets of structural support are required to form a solid base.

In addition, 4 pieces of transverse rectangular Alu bar (20x30x2 or 20x40x2 mm) of 2, 4 or 6 m are needed.

The 4 legs of different lengths (75, 80, 85 and 90 cm) are attached at 116 cm intervals to the 350 cm long Alu base bar by self-drilling screws.

The cross-bolts are screwed into the T-pieces on the tops of the table leg bases using self-drilling screws. This creates a surface with a precise gradient that allows the NFT channels to slide easily to all sides - see photo and video. 

The structure should be placed on a flat horizontal surface. T-pieces provide limited opportunity to level the surface.

- Use rectangular Alu bar with dimensions 20x30x2 mm or 20x40x2 mm for assembling and connecting the legs.

- The individual parts are connected with self-drilling TEX screws, see video instructions.

- The spacing between the supports should not exceed 2m. 

Included in the order:

4 pieces of supports of different heights to ensure a precise gradient

4 T-pieces for attaching the cross bars

1 piece Alu base bar 350 cm long

NOT INCLUDED IN THE DELIVERY ARE THE TRANSVERSE ALU BARS.

Due to shipping costs, complicated logistics and the fact that this is a basic commodity, we recommend you inquire about Alu transverse bars in your area. Alternatively, please contact us for a quotation for the delivery of a turnkey growing system.